WIC Valve 2PCG Series Electric Plastic Solenoid Valve
Click To Enlarge

Normally Closed PA66 Plastic Electric Air, Gas, Water Zero Differential 1" Inch 2 Way Solenoid Process Valve

 

WIC Valve 2PCG Series 2-way normally closed electric solenoid process valve is to control On/Off of air, inert gas, liquid, and vacuum. This solenoid valve has one 1" inlet and one 1" outlet port. Valve stays close when the coil is de-energized, and it opens when energized.  2PCG Series solenoid valve comes with a ED 100% encapsulated coil which suitable to operate in continuous service and constantly energized.  Valve can be mounted in any position.  

 

 

2PCG Series One Inch Plastic Electric Solenoid Valve Specification:

Valve Type: 2 Way Normally Closed (Valve opens with energized)

Service Media: Air, Gas, Liquid, Water, Vacuum

Operation Model: Direct Lift Diaphragm

Body Material: PA Plastic Valve Body

Seal Material: NBR (Buna N) Diaphragm & Plunger Tip

Coil Power: DC -30W ; AC - 50/60Hz 28VA

Coil Class: H Class IP 65

Coil Duty: 100% ED (Continuous Duty)

Operating Pressure: Vacuum 0 PSI to 90 PSI

Operating Temperature: 0 to 50 °C or 32 to 122 °F

Port Size: 1" Inch NPT Female Port

Coil Voltage Option: 12V DC, 24V DC, 24V AC, 110V AC, 220V AC

Low Power Consumption Coil: Upgrade Optional 12V DC - 10W, 24V DC - 7W, 24V AC - 8VA, 110V AC - 8VA, 220V AC - 8VA

Voltage Tolerances: DC: +10% –5% ; AC: +10% -15%

Electrical Connection: DIN 43650A Connector with LED Indicator

 

 

2PCG Series PA66 Plastic Solenoid Process Valve Dimensions (Unit=mm):

Model  Port (NPT) Flow Rate (Cv) Orifice Size  A B C
2PCG-1/2 1/2" 4.8 17 68 107 76
2PCG-3/4 3/4" 7.6 17 68 111 80
2PCG-1 1" 12 20 82 117 107
2PCG-1 1/4 1-1/4" 24 22 112 160 140
2PCG-1 1/2 1-1/2" 29 22 112 170 140
2PCG-2 2" 48 48 130 190 159

 

 

2PCG Series Plastic Electric Solenoid Valve Component Drawing: 


 

 

 

How to connect DIN connector with wire?

 

To connect the wire to DIN connector is simple and easy, shown below is the 4 easy steps:

 

1. Remove the Philip screw from the plastic housing protector.

 

 

 

2. Unplug the plastic housing from the DIN coil.

 

 

 

3. Remove the terminal block from the plastic housing.  Use the Philip screw to push the terminal block out from the plastic housing.

 

 

4. On the back of the terminal block, it makes 1, 2 and Ground. For the DC DIN coil, connect 1 to positive, and 2 to negative. For the AC DIN coil, connect 1 to Hot wire, 2 to Neutral wire, and Ground to Ground wire if required.

 

 

 

  • Item #: 2PCG-1-D
  • Manufacturer: WIC Valve
  • Condition: New

PA66 Plastic Zero Differential Electric Solenoid Valve 1" Inch

Price: $51.61
* Marked fields are required.
*
Availability: In-Stock
Qty: *