3/4″ Inch Pneumatic Angle Seat Valve Single Acting NC

$171.47

In stock

Description

3/4″ Inch Pneumatic Single Acting Spring Return Stainless Steel Air Actuated Angle Seat Valve Normally Closed

 

WIC Valve AVS series air actuated angle seat single acting spring return pneumatic valve use pressurized air to open the piston valve and close the valve with the build in springs inside the air actuator. This industrial air operated valve is used to control the on and off of the valve for media such as air, gas, liquid, water and steam.  The characteristic of the air actuated piston angle seat valve is that valve can be operated at very high temperature, high viscosity medium, and is less sensitive to dirt particles and debris.

The advantage of AVS Series air operated angle seat valve gives a highly efficient flow rate, it can be operated from zero differential pressure (vaccum) and mounted in any position.  With the fluid entry below the seat, AVS series valve can reduce the water hammering.  It features with a easy to see optical position indicator on the top of the actuator, when supply air to the valve, valve is opened and the pin pops up.

 

AVS Series Pneumatic Air Actuated Angle Seat Valve Specifications:

Valve Type: 2 Way Normally Closed

Service Media: Air, Gas, Liquid, Water, Steam, Oil, Vacuum

Operation Model: Air Actuated Single Acting (Spring Return)

Actuator Operating Pressure: 100 PSI

Actuator Operating Pressure Range: 65 – 120 PSI

Body Material: 316 Stainless Steel / CF8M

Actuator Material: CF8

Seal Material: Teflon (PTFE)

Seat Material: Teflon (PTFE)

Controlling Medium: Inert Air, Air

Operating Pressure: Vacuum to 240 PSI

Maximum Viscosity: 600 mm2/s (600 Centistokes)

Media Temperature: -20 to 180 °C (-5 to 350 °F)

Ambient Temperature: -20 to 60 °C (-5 to 140 °F)

Installation Orientation: Any Position

Port Size: 3/4″ NPT Female Port Standard

Installation Hardware: 1 Piece Tube OD 1/4″ X Thread 1/8″ Male Straight Connector Fittings

 

AVS Series Pneumatic Air Actuated Angle Seat Valve Components:

AVS Series Pneumatic Air Operated Angle Piston Seat Valve Dimensions (Unit=mm)

Model Actuator  C (NPT) Orifice  Cv E R P1 P2 D A B T
AVS-1/2-T 50 1/2″ 13 4.7 62 33.5 G1/8″ G1/8″ 126 68 133 11
AVS-3/4-T 50 3/4″ 18 9.5 62 33.5 G1/8″ G1/8″ 131 75 137 14
AVS-1-T 63 1″ 24 18.1 76 42 G1/8″ G1/8″ 165 90 174 15
AVS-1 1/4-T 63 1-1/4″ 31 23.1 76 42 G1/8″ G1/8″ 175 15 188 17.5
AVS-1 1/2-T 80 1-1/2″ 35 32.9 76 42 G1/8″ G1/8″ 178 115 190 17.5
AVS-2-T 80 2″ 45 52.8 96 50 G1/8″ G1/8″ 195 135 205 20

 

Additional information

Weight 3.00 lbs
Dimensions 8.00 × 6.00 × 4.00 in