.jpg)
|
|
|
Pneumatic Flow Speed Control Valve 3/16" Tube OD One Touch Composite Push In Valve Fitting
WIC Valve PFV Series composite flow speed control valve one touch push in fitting equipped with a convenient one touch release button that provides a easy and quick tubing connections with no special tools required. Our unique stainless collect design offers a secure connections that hold the tube firmly without restricting flow.
| Air Flow Speed Control Valve Specifications | ||
| Operating Pressure | 0 - 150 PSI | 0 - 990 kpa |
| Vacuum | 0 - 29.5 in Hg | 750 mm Hg |
| Operating Temperature | 0 - 60 °C | 32 to 140°F |
| Application | Air | |
| Recommended Tubing Material | Polyurethane, Nylon, Polyethylene, Polypropylene. | |
| Air Flow Control Valve Material of Construction | |
| Plastic Body | PBT (Polybutylene terephthalate) |
| Metal Body | Nickel Plated Brass |
| Release Button | POM (Poly oxy methylene copolymer) |
| Grip Ring | Stainless Steel |
| Thread Sealant | Teflon |
| O-ring | NBR (Buna-N) |
Schematic of Flow Control Valve Construction:
Fitting Installation and Removal Guide:
How to install the tubing into fitting:
1) Cut the tubing square ensure the outside diameter is free of score marks and no burrs.
2) Simply push tubing past the O-ring to the internal tube dead stop by hand.
3) Pull the tubing back gently to ensure it is secure for leakproof connections.
How to remove the tubing from fitting:
1) Press evenly on both sides of the release button against fitting body, keep the release button (collet) depressed and held in this position
2) Pull the tubing to slide out.
- Item #: PFV-T3/16
- Manufacturer: WIC Valve
- Condition: New
